Why Turbo Kits In Car Is Necessary?

A turbocharger is an exhaust-driven air compressor that is fundamentally an air pump. The power output of the air pump is directly related to the amount of air that can be induced into the cylinders. If you are looking for substantial improvements in your car’s performance, then consider buying a full race turbo kit.

 

 A normal engine runs by atmospheric pressure whereas a turbo kit performs by generating power that forces air into the engine at a greater pressure. This increases the power potential of the engine. However, adding a turbo kit to your vehicle is a highly complicated process. The addition of the turbocharger in your car results in forced induction conversions. So, you should do it with extreme care and after understanding the concept of the turbo kits so that it can run efficiently.

Essential Parts of a Turbo Kit That Explain Its Importance in a Car

 Here’s a basic explanation of turbo kit parts, what they do, and why it’s necessary for your car. 

• Turbocharger

 

This is the most integral component in the kit which is a high-power and high-volume compressor. It is interestingly driven by the waste energy from the engine exhaust. For this reason, any turbo will not be good for your car to drive its performance. You need a turbo with specific capabilities that suit your engine and expected performance level. 

• Turbo Manifold and Downpipe

 The turbo manifold helps to install the turbo on the engine of your car. It puts the compressor blades in the exhaust stream which enables the turbo to run. The function of the downpipe is to link the rest part of the exhaust piping, seamlessly into the car’s exhaust system smoothly.

• Intercooler 

The turbochargers need intercooling and that’s why the kit has an intercooler. It helps the turbocharger to function properly by working as an ‘air radiator’ which cools the compressed intake charge once it releases from the turbocharger. It does that before the intake charge reaches the engine. So, without the intercooler, the act of pressurizing the air will heat the air too much in the engine, which can even result in an explosion. 

• Intercooler intake piping

 In the turbocharger, the intake piping joins the filter for the engine air with the intake port. It also connects the compressor outlet to the intake manifold and intercooler. While getting a full-race turbo kit, make sure that the turbo piping is stronger than the other stock components so that it can handle the pressure of the intake stream. 

 

• Fuel controller 

 

Fuel management is one of the vital tasks of turbo kits. They have a fuel controller which regulates the amount of fuel so that no extra pressure is created in the intake charge.

• Coolant or oil supply lines

 Coolant lines in the turbo kit help if the turbocharger is water-cooled. So, the coolant lines may or may not be necessary depending on the type of turbocharger. However, supply lines are needed in every kit, which cools down the bearings and keeps them lubricated. 

Key Takeaway!

 All these vital components of a turbo kit explain why it is necessary to have it in your car for substantial improvement in engine performance. Whether you need to enhance your track time or improve your miles/gallon, get the full race turbo kit mounted in your car from Red Eye Racecars. It is a specialized car maker that provides state-of-the-art car components and helps in building superior quality customized race cars.